热门关键词:
液压缸稳定性试验平台
  • 该文件为docx格式
  • 文件大小:1.56 MB
  • 下载次数
  • 文件评级
  • 更新时间:2019-05-30
  • 发 布 人rongxinglu
  • 文件下载:
  • 立即下载

  • 文件介绍:
  • 该文件为 docx 格式,下载需要 10 积分
  • 长细型卧式液压缸因其结构特点,在自身重力与轴向载荷的作用下容易发生挠曲变形与失稳,造成极大的安全隐患。本文旨在设计一个适用于长细型卧式液压缸挠曲与稳定性试验的试验平台。根据模化理论设计出大型液压油缸按比例缩小后的模型,并将模型液压缸视作阶梯杆采用计算法与有限元分析法模拟计算模型挠度。根据计算出的结果,对试验平台的总体方案进行设计,并完成平台结构设计,最终使用有限元分析软件辅助进行强度校核,结果表明该试验平台强度满足要求,结构可靠。通过文中的设计计算与强度校核,最终设计出一款适用于不同行程与缸径,结构稳固可靠,拆装方便的液压缸挠曲试验平台。
    长细型卧式液压缸因其结构特点,在自身重力与轴向载荷的作用下容易发生挠曲变形与失稳,造成极大的安全隐患。本文旨在设计一个适用于长细型卧式液压缸挠曲与稳定性试验的试验平台。根据模化理论设计出大型液压油缸按比例缩小后的模型,并将模型液压缸视作阶梯杆采用计算法与有限元分析法模拟计算模型挠度。根据计算出的结果,对试验平台的总体方案进行设计,并完成平台结构设计,最终使用有限元分析软件辅助进行强度校核,结果表明该试验平台强度满足要求,结构可靠。通过文中的设计计算与强度校核,最终设计出一款适用于不同行程与缸径,结构稳固可靠,拆装方便的液压缸挠曲试验平台。

    关键词:液压缸;挠度;试验平台;稳定性


    Abstract
    Due to the structural characteristics of the long and slender horizontal hydraulic cylinder, it is prone to flexural deformation and instability under the effect of its own gravity and axial load, which may cause great safety hazards. This paper aims to design a test platform suitable for the flexural stability test of long and slender horizontal hydraulic cylinders. First of all, the model of large hydraulic cylinder is scaled down according to the modeling theory. The calculation method and finite element analysis method are used to simulate the deflection of the model, while simulating, the model hydraulic cylinder is regarded as the stepped rod. According to the calculated results, the overall scheme of the test platform is designed. And further, the platform structure design is completed. Finally, the finite element analysis software is used to assist the strength check. Through the design calculation and strength check in the paper, a hydraulic cylinder deflection test platform suitable for different strokes and bore diameters. The structure of the test platform is stable and reliable, and it is also convenient for assembly and disassembly.

    Keywords: Hydraulic cylinder; Deflection; Test Platform; Stability


    目 录
    摘 要 II
    Abstract III
    1 绪论 1
    1.1 设计背景 1
    1.1.1 液压启闭机 1
    1.1.2 液压缸挠曲与稳定性试验 1
    1.2 研究现状 2
    1.2.1 液压缸挠曲与稳定性计算 2
    1.2.2 液压缸试验平台 3
    1.3 主要研究内容 3
    1.4 论文结构安排 4
    2 被试液压缸模型设计 5
    2.1 被试液压缸及模型数据 5
    2.1.1 原型启闭机液压缸参数 5
    2.1.2 模型比尺的选取 6
    2.2 液压缸模型的结构设计 8
    2.2.1 模型液压缸的缸筒与端盖连接形式 8
    2.2.2 缸筒底部厚度 9
    2.2.3 缸筒头部法兰厚度 10
    2.2.4 活塞组件 11
    2.3 结构设计数据汇总 12
    3 液压缸挠度与稳定性计算 14
    3.1 液压缸的挠度计算 14
    3.2 液压缸压杆稳定 19
    3.3 液压缸挠曲变形的有限元分析 21
    4 液压缸测试平台总体方案设计 25
    4.1 液压缸测试平台原理及设计目标 25
    4.2 测试平台液压系统设计 25
    4.3 液压缸测试平台传感器选择布置 26
    5 液压缸试验平台结构设计 28
    5.1 试验平台结构设计 28
    5.1.1 试验平台各部分结构 28
    5.1.2 试验平台装配体 29
    5.1.3 液压缸试验平台整体结构 31
    5.2 试验平台的强度校核 31
    5.2.1 平台与缸尾安装部分的强度校核 32
    5.2.2 平台与活塞杆安装部分的强度校核 33
    5.2.3 平台其他部分的强度校核 34
    6 总结与展望 35
    6.1 总结 35
    6.2 展望 36
    参考文献 37
    致 谢 39
    ...
文档留言
验证码: 请在右侧输入验证码 看不清楚,换一个