热门关键词:
XK160开炼机机械工程学院
  • 该文件为doc格式
  • 文件大小:748.50 KB
  • 下载次数
  • 文件评级
  • 更新时间:2018-12-19
  • 发 布 人晁俊杰
  • 文件下载:
  • 立即下载

  • 文件介绍:
  • 该文件为 doc 格式,下载需要 1 积分
  • XK160开炼机机械工程学院摘 要

    开炼机主要用于:生胶的塑炼;胶料的混炼;混炼胶的热炼、供胶;胶料的压片;胶料中杂质的清除;生胶的破碎、洗涤;再生胶粉碎、混炼。压片;生橡胶的压片等。
    在设计辊筒时,选择辊筒的形式极为重要,因为辊筒时开炼机最为重要的零件之一,因为开炼机的结构形式关系到开炼机的冷却方式及冷却效果;在考虑如何布置开炼机的空间分布时,我采用了纵向高度加大,并将发动机安在箱体上,而并非将开炼机的减速器与开炼机的发动机安在横向,个人觉得纵向的开炼机可以减少空间,在等面积的厂房中增加了可放开炼机的总数量,更能发挥其优势。
    本次设计主要针对XK-160开炼机进行设计、计算和校核,其中包括驱动电机和传动装置以及辊距调整装置等,此大小的开炼机一般用于实验室研究使用,此次制图采用机械CAD对开炼机的结构形式及空间分布进行绘制,并随开炼机主要的零部件以及辅助部件进行设计,并学习掌握制图软件的应用等。
    本次设计在结构上并不是采用分出式齿轮减速器(即在机器外通过联轴节连接),而是使减速机构在机身内,此设计可明显减少机器的占地面积,但对空间高度要求相对高一些。这样设计使开炼机的结构更紧凑,对于安全问题,应设有相应的安全装置;此次设计辊筒的冷却方式采用冷却水进行冷却这样会使费用大大降低,但耗水量较大,并应设置其冷却水应循环使用。

    关键词: XK-160开炼机; 机械CAD; 结构设计; 强度校核

    Abstract

    Open smelting machine is mainly used for: Rubber plastication; rubber mixing; mixing thermal refining, glue supply; rubber sheeting; removal of impurities in rubber; rubber crushing and washing; reclaimed rubber crushing, mixing. Pellet; raw rubber tablet.
    In the design of roller, roller is extremely important, because the roller open smelting machine is one of the most important parts of, because the mill structure relationship to open smelting machine cooling method and cooling effect; in considering how to decorate open mill's spatial distribution, I used the longitudinal height increase, and the engine is arranged on the box body, and not to open mill's reducer and open smelting machine engine safety in the transverse direction, personally feel that the vertical milling machine can reduce the space, in the area of the plant increased the total number of mixer can be released and, can give full play to its advantages.
    This design is mainly for xk-160 open smelting machine design, calculation and verification,including driving motor and a transmission device and a roller spacing adjustment device, the size of open smelting machine for use in research laboratories, the drawing with CAD for mixer for the structure and spatial distribution of drawing, and with open smelting machine main parts and accessories design and learn to master drawing software application.
    The design on the structure and not the separate type gear reducer (i.e. outside the machine by coupling), but the reduction mechanism in the body, this design can significantly reduce the machine covers an area of, but the space height requirement is relatively high. This design makes the open smelting machine more compact structure, for security issues should be provided with appropriate safety devices; cooling method for the design of roller using cooling water cooling that would greatly reduce the cost, but the consumption of a large amount of water, and should set its cooling water should be recycled.

    Key words: XK-160 open refining machine; mechanical CAD; structural design; strength check

    目 录

    第一章 序言 1
    1.1目的及意义 1
    1.2目前国内、国的外的开炼机的现状和以后的发展前景 1
    1.3今后发展方向 2
    第二章 开炼机的工作原理 3
    2.1用途及类型 3
    2.2基本结构 4
    2.3工作原理 4
    第三章 开炼机主要的参数的选择与计算 7
    3.1辊筒的直径与辊距 7
    3.2辊筒的回转速度与速比 8
    3.3驱动功率的确定 9
    3.4横压力的确定 10
    3.4.1根据胶料捏炼的流体动力理论的横压力计算 11
    3.4.2利用推荐值来计算横压力 11
    3.5生产能力的计算 12
    第四章 开炼机传动系统的设计计算 13
    4.1传动形式 13
    4.2传动电动机的选择 13
    4.3速比齿轮组 15
    4.4传动齿轮组 17
    第五章 开炼机主要零部件的设计 21
    5.1两辊辊筒的设计 21
    5.1.1辊筒的材料的确定和基本要求的选择 21
    5.2辊筒的计算 22
    5.3辊筒轴承 26
    5.4开炼机的机架与压盖 27
    5.5机架底梁的应力计算 28
    5.6 压盖的强度设计 30
    5.7 调距调整装置 31
    5.7.1调距装置中螺纹的计算 32
    5.7.2螺纹自锁条件 33
    5.7.3螺母台肩的计算 33
    5.8安全与制动装置 34
    5.8.1安全装置 34
    5.8.2制动装置 35
    5.9辊温调节装置 35
    5.9.1润滑系统 35
    5.10冷却计算 35
    5.10.1冷却计算 36
    5.10.2实际冷却水消耗的确定 37
    5.10.3冷却水管进水管直径计算 37
    结论 39
    参考文献 40...
文档留言
验证码: 请在右侧输入验证码 看不清楚,换一个
更多..相关文档
    无相关信息