AFAG_11001780_Rotary_module_RM_25-DW_90_HUB_0
The RM 25 rotary module is a pneumatically driven module for rotating middle loads in confined spaces. With torques of maximum 2.5 Nm, loads can be rotated from 0-180°, depending on the variant also with intermediate positions. The end positions can be finely adjusted as required over the entire stroke range using stop screws.
The RM are pneumatically operated devices for rotary movements from 0 to 180°. A double-acting piston inside the housing drives a pinion shaft with ball bearings. The pinion shaft moves a rack back and forth. The stroke of the rack and the angle of rotation of the pinion shaft can be limited with two stop screws.
In the end positions, the rotary movement is braked with two Afag shock absorbers. On the rotary modules with one or two intermediate positions, an intermediate position cylinder is additionally mounted above the housing on a longitudinal guide. Its index engages with the rack when actuated and is carried along by it in a horizontal line.
关于 RM25直线模组 的使用提示:
本文件为
三维模型 资源,格式
zip,大小
4.96 MB。
由
syp123123 于 2026-11-10 上传。仅供学习参考,不得商用。
侵权问题请联系
帮助中心。